Skip to content
Stain gel for seals, grout and caulk. Paste for holes and cracks.
Find your fix

2 products · 3 sizes and packs

Sugelary wall repair

White paste for nail holes, cracks and chips, with the scraper and sandpaper in the box. From $7.99.

Showing 2 of 2

How the paste goes on

  1. Fill

    Shake the tube, then press paste into the hole or along the crack.

  2. Scrape flat

    Drag the scraper across at a low angle so the paste sits flush.

  3. Let it dry

    About 3 hours by our tub kit's directions, longer in cold air.

  4. Sand and paint

    Sand lightly, wipe the dust, then paint to match the wall.

Both kits use the same white paste: wall glue, resin and carbonate filler. The tube is for small holes and thin cracks. The tub carries more paste and adds mesh patches for holes a tube cannot bridge.

The paste dries white. Sand it flat and paint over it to match the wall.

Questions we get

What exactly does the gel remove?

The dark stains that damp leaves in silicone, grout and caulk. It is a stain remover, not a disinfectant. The lasting fix is keeping the area dry.

How long do I leave the gel on?

Follow the time on your bottle. Our directions range from 3 to 8 hours, and old, deep marks do better with the longer end and a second round.

Can I use it inside the washer drum?

It is made for the rubber door seal and other hard surfaces around the home. After treating a washer seal, run a rinse or cleaning cycle before the next load of clothes.

Will the marks come back?

If the seal or caulk keeps staying wet, yes. Leave the washer door open after a wash, wipe the seal dry, and run the bathroom fan.